Get in Touch
Email Address
info@nouvag.com
Phone Number
+41 (0)71 846 66 00
High speed burrs
Angled handpiece for endoscopic spine surgery
with 1:1 transmission and quick lock system.
High speed rose burrs
Rose burr, highspeed, steel
| Head Ø | Number of flutes | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|
| 0.8 mm | 6 | RS.070.008 | ||
| 1.0 mm | 12 | RS.070.010 | ||
| 1.4 mm | 8 | RS.070.014 | RS.095.014 | RS.125.014 |
| 1.8 mm | 8 | RS.070.018 | RS.095.018 | RS.125.018 |
| 2.3 mm | 8 | RS.070.023 | RS.095.023 | RS.125.023 |
| 2.7 mm | 10 | RS.070.027 | ||
| 3.1 mm | 10 | RS.070.031 | RS.095.031 | RS.125.031 |
| 4.0 mm | 12 | RS.070.040 | RS.095.040 | RS.125.040 |
| 5.0 mm | 12 | RS.070.050 | RS.095.050 | RS.125.050 |
| 6.0 mm | 14 | RS.070.060 | RS.095.060 | RS.125.060 |
Rose burr, highspeed, carbide
| Head Ø | Number of flutes | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|
| 0.5 mm | 6 | RC.070.005 | ||
| 0.8 mm | 6 | RC.070.008 | ||
| 1.0 mm | 6 | RC.070.010 | ||
| 1.4 mm | 6 | RC.070.014 | ||
| 1.8 mm | 6 | RC.070.018 | ||
| 2.3 mm | 6 | RC.070.023 | ||
| 2.7 mm | 8 | RC.070.027 | ||
| 3.1 mm | 8 | RC.070.031 | ||
| 3.5 mm | 8 | RC.070.035 | ||
| 4.0 mm | 10 | RC.070.040 | RC.095.040 | RC.125.040 |
| 5.0 mm | 12 | RC.070.050 | RC.095.050 | RC.125.050 |
| 6.0 mm | 14 | RC.070.060 | ||
| 7.0 mm | 16 | RC.070.070 |
High speed diamond burrs
Diamond ball burr, highspeed
| Head Ø | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|
| 0.6 mm | DA.070.006 | ||
| 0.8 mm | DA.070.008 | ||
| 1.0 mm | DA.070.010 | DA.095.010 | |
| 1.4 mm | DA.070.014 | DA.095.014 | |
| 1.8 mm | DA.070.018 | ||
| 2.3 mm | DA.070.023 | DA.095.023 | DA.125.023 |
| 2.7 mm | DA.070.027 | ||
| 3.1 mm | DA.070.031 | DA.125.031 | |
| 3.5 mm | DA.070.035 | DA.095.035 | |
| 4.0 mm | DA.070.040 | DA.095.040 | DA.125.040 |
| 4.5 mm | DA.070.045 | DA.125.045 | |
| 5.0 mm | DA.070.050 | DA.095.050 | DA.125.050 |
| 6.0 mm | DA.070.060 | DA.095.060 | DA.125.060 |
| 7.0 mm | DA.070.070 |
Diamond ball burr, coarse, highspeed
| Head Ø | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|
| 2.3 mm | DC.070.023 | DC.095.023 | DC.125.023 |
| 3.1 mm | DC.070.031 | DC.095.031 | DC.125.031 |
| 4.0 mm | DC.070.040 | DC.095.040 | DC.125.040 |
| 5.0 mm | DC.070.050 | DC.095.050 | DC.125.050 |
| 6.0 mm | DC.070.060 | DC.095.060 | DC.125.060 |
Diamond ball burr, extra coarse, highspeed
| Head Ø | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|
| 3.0 mm | DEC.095.030 | DEC.125.030 | |
| 4.0 mm | DEC.095.040 | DEC.125.040 |
Diamond ball burr, mega coarse, highspeed
| Head Ø | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|
| 4.0 mm | DMC.070.030 | ||
| 5.0 mm | DMC.070.040 |
Diamond egg burr, highspeed
| Head Ø | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|
| 4.0 mm | DAE.070.040 |
Diverse forms of burrs
Cylinder burr with cross-train, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 4.0 mm | 10 | 9.0 mm | CB.070.040 | CB.125.040 | |
| 5.0 mm | 12 | 10.0 mm | CB.070.050 |
Bud burr with cross-train, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 4.0 mm | 10 | 8.0 mm | BB.070.080 | BB.095.040 | |
| 5.0 mm | 12 | 9.5 mm | BB.070.095 |
Egg burr, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 4.0 mm | 10 | 9.5 mm | EB.095.040 | EB.125.040 | |
| 6.0 mm | 14 | 9.5 mm | EB.125.060 |
Pear burr, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 6.0 mm | 14 | 10.0 mm | PB.095.060 | PB.125.060 |
Acorn burr, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 7.5 mm | 8 | 9.3 mm | AB.095.075 | AB.125.075 |
Neuro burr, highspeed, carbide
| Head Ø | Number of flutes | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|---|
| 1.8 mm | 2 | 3.0 mm | NB.125.018 | ||
| 3.0 mm | 2 | 4.0 mm | NB.125.030 |
Wire Pass Drill, highspeed, carbide
| Head Ø | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|
| 1.0 mm | 10.0 mm | WD.095.010 | WD.125.010 | |
| 1.2 mm | 10.00 mm | WD.095.012 | WD.125.012 | |
| 1.5 mm | 6.6 mm | WD.125.015 |
Spiral Drill, highspeed, carbide
| Head Ø | Working length | Shank length 70 mm, for handpieces Ref. 1903/1906 | Shank length 95 mm, for handpieces Ref. 1904/1907 | Shank length 125 mm, for handpieces Ref. 1905/1908 |
|---|---|---|---|---|
| 1.5 mm | 20.0 mm | SD.095.015 | ||
| 2.0 mm | 20.00 mm | SD.070.020 | SD.095.020 |
Nikola Koricanska
Area Sales Manager
EU, America and Pacific
Leszek Kazana
Area Sales Manager
Commonwealth of Independent States
Jürgen Heni
Area Sales Manager
Asia, France and Switzerland
Mladen Podgorac
Area Sales Manager
Northern Europe, Balkans, Africa and Middle east