Saw handpieces

Nouvag's robust micro saws are characterized by a notably well cutting performance. The housing made of medical stainless steel garantees for carefree durability despite of countless reprocessing cycles.

Our micro saws are mainly applied in Osteotomy for bone treatment, bone removal and for harvesting of osseous matter. A quiet, low vibration, smooth run was the declared target while constructing the micro saws.

The large assortment of saw blades will support almost all intended purposes with a strong Focus on power assisted Rhinoplasty

Micro Compass Saw

MSS 5000 Micro-jigsaw

Article: 5040

MSS 5000 Micro-jigsaw with INTRA EN3964 coupling, removable irrigation tube, recommended speed 15'000 rpm. The micro-jigsaw for sawing and rasping with tools of different lengths and designs - especially made for power assisted Rhinoplasty

The further developed Micro Compass Saw works with a stroke of 4 mm at 75 strokes per second, which significantly enhances the cutting performance.

Saw blades	length	Reference
	11 mm	5041
	14 mm	5042
	18 mm	5043
	22 mm	5044
	26 mm	5045
	17 mm, rounded	5105
	21 mm, rounded	5106

Spare blades of 0.4 mm thickness, in packaging unit of 6 pieces.

Set	Reference
Spare blades set with one piece each of 11 mm, 14 mm, 18 mm, 22 mm and 26 mm length and 0.4 mm thickness.	5049

Sagittal Saw, Osseoscalpel

MOS 5000 Sagittal Saw

Article: 5110

MOS 5000 Sagittal Saw with INTRA EN3964 coupling, removable irrigation tube, recommended speed 15'000 rpm. The sagittal saw is ideal for applications in which the two other saws are unsuitable for reasons of space.

The Micro Sagittal Saw has an oszillation frequence of 250 cycles per second. Saw blades are often bent to match the correct angle of an intended cut.

Reference	5115	5116	5114	5117	5118	5119

Spare blades of 0.4 mm thickness, in packaging unii of 6 pieces.

Set	Reference
Spare blades set with one piece each of every size. Ref 5115, Ref 5116, Ref 5114, Ref 5117, Ref 5118, Ref 5119	5120

Micro Oscillating Saw

OMS 5000 Oscillating micro-saw

Article: 5090

OMS 5000 Oscillating micro-saw with INTRA EN 3964 coupling, removable irrigation tube, recommended speed 15'000 rpm. These micro-saws are used in all applications, where it's necessary to cut at right angles.

The Oscillating Micro Saw works with a frequency of 266 oscillations per second.